Megasorber A100 is a high tack, fast drying spray contact-bonding adhesive utilising the latest pressure-sensitive adhesive technology.
Non-flammable adhesive
Megasorber A100 is designed to have high green strength (strong initial grab). It has a long open time and high tack level with good bonding strength for various materials, such as foam, polyester, plasterboard, plywood, sheet metal, most hard plastics, soft fabric and leather.
Megasorber A100 has a temperature resistance up to 104°C.
Megasorber A100 utilises the latest airless spray-on technology for easy application and handling. It is supplied in the canister (17.2kg) or aerosol (500ml). The canister has a nonflammable propellant, making it one of the most user-friendly and environmentally friendly spray on adhesives.
Product
benefits




Key features
- High tack and high bonding strength.
- Fast drying.
- Non-flammable adhesive.
- Non-flammable propellant for Canister (flammable propellant for aerosol).
- Airless spray-on technology.
- Environmentally friendly.
- Easy to apply.
Applications
Megasorber A100 is designed for installing Megasorber range acoustic materials.
In addition to this, it also provides excellent bonding of most common materials, such as foam, polyester, aluminium, stainless steel, galvanised steel, zinc, copper, brass, powder coated metal, glass, acrylic glass, ceramics, stone, concrete, plywood, plasterboard, cement board and more.
Architectural applications
A100 is also widely used for installing acoustic panels to reduce reverberation or echo for:
- Sports stadiums, multipurpose halls, school halls.
- Music rooms, recording studios, home theatres.
- Aquatic centres.
- Call centres, commercial and office buildings.
- Restaurants, bars and clubs.
Technical specifications
Megasorber A100 is a spray contact adhesive designed to install Megasorber soundproofing products.
Product Codes
Standard thickness 25mm, 50mm, 100mm
Product Code | Thickness | Panel Size |
Megasorber FM25 | 25mm | 1.2m x 2.4m |
Megasorber FM50 | 50mm | 1.2m x 2.4m |
Megasorber FM100 | 100mm | 1.15m x 2.35m |
Other thicknesses available: (minimum order quantity applies) 12mm, 38mm & 75mm
Note:
- Base foam is either white or light-grey;
- Standard facing colours are: white, grey and black; Aquatic, Dark Grey and Sandstone are made to We offer custom cutting to size; please note that cutting charges will apply. Prices will be quoted on the application.
- Product code with optional extra:
- G8 facing may have a stripy appearance and creases. Hairline creases may appear on the facing when The creases do not affect the acoustic performance.
- There are colour variations between batches; whilst we take every care to minimise batch-to-batch variation, in some instances, variation may be unavoidable and will occur.
- Dimensional change will occur in the FM foam substrate with a change in relative humidity and temperature, this may cause creasing on the Soundmesh® G8 facing. The creases do not affect acoustic performance.
- Thickness tolerance is ± 5%, and sheet dimension tolerance is ± 1%.
- The standard sheet size is 2m x 2.4m. Other sheet sizes available: 1200mm x 1200mm and 1200mm x 600mm (1195mm x 595mm if packed in boxes). We can cut panels to size; however, extra cutting charges apply.
- Water repellent facing is recommended for easy surface
- Recommended adhesive is Megasorber A200 or Megasorber
FM25W-RW-DS
Thickness (mm)
12
25
38
50
75
100
Base Foam
W = White
G = Grey
Soundmesh® G8
RW = Water repellent white
B = Black
RB = Water repellent black
G = Grey
RG = Water repellent grey
DG = Dark Grey
RDG = Water repellent dark grey
RS = Water repellent sandstone
RQ = Water repellent aquatic
Optional extra
DS = G8 on both sides
Blank = G8 on one side only
Physical Properties
- Base foam colour: White or light grey;
- Density, weight and thermal insulation (R-value) properties
Product Code | FM12 | FM25 | FM38 | FM50 | FM75 | FM100 |
Nominal density (kg/m³) | 25 | 16 | 13 | 12 | 11 | 10 |
Nominal weight (kg/m2) | 0.30 | 0.40 | 0.50 | 0.60 | 0.80 | 1.0 |
R-value* | 0.35 | 0.74 | 1.12 | 1.47 | 2.21 | 2.94 |
* Calculated value based on thermal conductivity @ 15℃
Flammability
- AS 1 – 2015 Determination of fire hazard properties:
Product Group Number Classification Average Specific Extinction Area
Group 1 98.3 m²/kg
- 1-2015: Reaction to Fire Tests – Heat Release Smoke Production and Mass Loss Rates. Group 1 Classification.
- 3.1989: Early Fire Hazard Properties: Simultaneous Determination of Ignitability, Flame Propagation, Heat Release:
Ignitability | Spread of Flame | Heat Evolved | Smoke Developed |
0 | 0 | 0 | 4 |
- BS 476-6:1989+A1:2009 Fire tests on building materials and structures – Fire propagation of products:
Fire propagation index, I | Sub-index, i1 | Sub-index, i2 | Sub-index, i3 |
7.4 | 5.3 | 2.1 | 0.1 |
AS ISO 354-2006 Measurement Results
|
Frequency Random Incidence Absorption Coefficient
- BS 476-7:1997 Fire tests on building materials and structures – Surface spread of flame of products Classification: Class
- EN45545-2:2013+A1:2015 Railway Applications – Fire protection on railway vehicles Part 2: Requirements for fire behaviour of materials and components. Meets the requirements of R1 for HL1, HL2, HL3 Hazard Level Classification.
Volatile Organic Compounds (VOC)
ASTM D5116 “Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Material/ Products”: 0.016 mg/m2/hr (well below the GreenTag requirement limit of 0.5mg/m2/hr).
Installation instructions
These recommendations are for general guidance only. Installation methods must be tested under actual service conditions to determine their suitability for a particular purpose.
Keep acoustic panels flat. Panels must be kept flat during the handling and installation process. Bending or folding sheets may create creases on the Soundmesh® G8 facing. Once formed, these creases are difficult to remove.
Cutting (if required). The panel can be hand-cut by a knife (sharp utility knife or similar) or machine-cut by a bench saw or rotating blade cutter with a toothless blade.
Note: It is recommended to wear gloves during cutting. The Soundmesh® G8 facing edges may irritate or cut the skin.
Clean substrate surface with Megasorber AC5, acetone or similar. The surface must be dry, free of oil, dust, grease, rust and other contaminants.
Install the panels direct-fix using Megasorber A200 or A100 adhesives, with express finish edges or between panels using powder coated aluminum trim.
Clean dirt and marks on the Soundmesh® G8 facing with Megasorber
M8 Clean block and water. Dry with a microfiber cloth. Remove excessive adhesive on hands, cloth or equipment with Megasorber AC5.
Direct-fix acoustic panels using Megasorber A200 adhesive.
Available in 600ml sausage for caulking gun and 290ml cartridges for cartridge gun.
- Apply adhesive on the back of the acoustic panel (NOT on the Soundmesh® G8 facing).
- Install the panel immediately after application of the
Application Pattern
Full-size panel (1.2m x 2.4m) adhesive application
Minimum bead size (glue width) = 10mm to 15mm diameter. Recommended usage: approx. 1.5 to 2 sausages per full-size panel (1.2m x 2.4m), or approx. 2-3 cartridges per full-size panel.
Direct-fix with Megasorber A100
Spray Adhesive
- Connect a hose and spray gun to the new canister. Roll the canister backwards and forwards vigorously for 1-2 minutes to ensure the adhesive has not settled or separated during transit.
- Spray adhesive onto the back of the acoustic panel (not on the Soundmesh® G8 facing). Spray one coat to seal the porous surface vertically and then a second coat horizontally to achieve maximum adhesive contact.
- Spray adhesive on the substrate
- Allow adhesive to dry thoroughly. The adhesive should be touch-dry in 3-5 minutes (depending on conditions).
- Bond both surfaces together within 10 minutes of the adhesive being touch-dry.
- Apply uniform pressure over the surface.
Spray patterns
Note: we recommend A100 on a smooth surface, such as refrigeration panels, plasterboards and metal panels. A100 is not suitable for uneven or textured surfaces. For uneven or textured surfaces, such as concrete soffit and brickwork, we recommend A200 adhesive.
Finish
Express Finish.
Leave a gap of 20mm to 30mm between panels
Powder-coated aluminium or metal trims
FM50 Acoustic Panel
Ceiling
Walls
Information for Specifiers
Please feel free to use the information to include in your project specifications.